EPOXAL floor coatings are designed to provide a permanently bonded protective coating to new concrete or restore damaged floors. EPOXAL products are available in a wide range of colours and designs, and can be applied in a range of thickness. depending on the requirements of the installation. The following forms are available:

EPOXAL 3:1 High solids self priming epoxy designed for general service use High impact resistance.

EPOXAL 100 100% solids, solvent free, zero V.O.C.. high performance floor coating for use in chemical environments or wherever superior protection is required. Ideal in secondary containment situations.

EPOXAL 100WH 100% solids, general service, economical, epoxy floor coating for use in environments where solvent odour cannot be tolerated.

EPOXAL 100 Primer 100% solids epoxy primer for use along with EPOXAL floor systems. EPOXAL 100 DC Primer 100C.o solids epoxy primer that is designed for use over damp or moist concrete in conjunction with EPOXAL floor systems.

EPOFLEX 100 A 100% solids, flexible membrane, epoxy floor coating which acts as a water proofing membrane. a crack isolator and will enhance the EPOXAL floor coating systems ability to bridge cracks. It exhibits t 00% elongation and recovery.

KROMOTEX® is a three dimensional, liquid applied and dry broadcasted coating system.

It is composed of an epoxy base, coloured flakes and multiple clear glaze coats it is

available in 32 preselected colour patterns.

KROMOQUARTZ SLD is a high performance overlay system designed for demanding industrial and commercial environments. It will protect new concrete or resurface concrete floors subjected to severe processes (tragic, chemicals, food, solvents, oils & greases).

The system Consists of a trowel applied blend of high performance epoxy liquids and graded quartz silica aggregates. The surface is then sealed with a solid colour EPOXAL coating for high resistance to industrial traffic, impact, abrasion, chemicals & liquid immersion. 6’SLD" will out perform any thin film system.

It’s perfect for resurfacing existing concrete floors.

A decorative blend of multi-coloured quartz aggregate, mixed with clear EPOXAL liquids.

"DEC" is trowel applied for a seamless, monolithic, high strength floor. The surface is sealed with clear EPOXAL for high resistance to impact, abrasion, chemicals & liquid immersion. Available in a range of colour combinations or custom patterns.

A clear. single component, aromatic, moisture-cured urethane. Ideal for interior use as a sealer on bare concrete or wood.

Superior, clear, moisture-cured urethane with aliphatic chemistry for additional durability,

gloss retention & non-yellowing properties. For interior applications.

A clear, acrylic, non-yellowing coating for use on exterior surfaces. Can be used as a clear sealer on bare wood, concrete or masonry; or as a glaze coat over other npc flooring. It withstands exterior temperature fluctuations without discolouring, crazing or cracking.